Transmission Parts VW/Audi Case Hardware
Print Share View Instructions

Symptoms:

  • Coolers cannot be flushed out
  • Leaking OE coolers
  • Overheating

Cause:

OE cooler design commonly allows debris blockage and coolant/ATF cross-contamination.

Correction:

Installing Sonnax remote transmission cooler adapter kit allows replacement of OE oil-to-water cooler with commonly available aftermarket oil-to-air cooler kits.

01M, 01N, 01P, 096, 097, 098

Remote Transmission Cooler Adapter Kit
Part No. 119814-01K

View Instructions Find a Distributor

Bolt-on OE oil-to-water coolers used in listed VW/Audi units often leak internally and allow antifreeze/ATF cross-contamination. They are also very difficult to flush thoroughly due to internal design restrictions. Reuse of the OE cooler after rebuild can result in debris contamination and high operating temperatures due to reduced oil flow. Installing Sonnax remote transmission cooler adapter kit 119814-01K enables elimination of the OE cooler in favor of commonly available aftermarket oil-to-air cooler kits.

  • Allows for direct air cooling of ATF
  • Eliminates possibility of coolant getting into ATF
  • Anodized aluminum adapter housings combat corrosion

Cooler not included. For assistance in selecting the right cooler for your application, contact your chosen aftermarket cooler manufacturer.

  • Hose Barbs (2) 3/8"
  • Stainless Steel Hose Clamps (2)
  • Hose Mender
  • Adapter Housings (2)
  • O-Rings (2) .103" Thick
  • O-Rings (2) .139" Thick

  • 01M, 01N, 01P, 096, 097, 098 Remote Transmission Cooler Adapter Kit 119814-01K
↑