Axial thrust load of hardened needle rollers on softer gear.
These high-quality bronze thrust washers are designed to more effectively withstand the wear and axial thrust load of the mainshaft 2nd gear assembly
Maninshft 2nd gear assembly, Bronze
On Honda 4-speed transmissions, the mainshaft 2nd gear wears severely from contact with the 2nd clutch needle roller bearing. This bearing also needs frequent replacement due to wear. The wear on the gear and the bearing is due to the axial thrust load on the assembly. Replace the needle bearing with Sonnax part number 88406-SP, 88406B or 88406C. These high-quality bronze thrust washers are designed to more readily withstand the wear and axial thrust load of the mainshaft 2nd gear assembly
|88406-SP||AK, AS, F4, L4, CA, PL||2.028"||.084"|
|88406C||G4, K4, L5, PL5X||2.185"||.103"|
The gear thrust surface mustbe in good condition. A worn gearwill cause failure.
Questions or comments? Send us a message using the form below and we’ll get back to you as soon as possible.