- B Clutch burned
- Bushing failure
- Bushing wear
- Ratio codes
OE bushing material composition allows premature wear.
Install improved Sonnax input/output shaft bushings to restore critical clearances and resist untimely wear.
Input/Output Shaft Bushing
Package Quantity: 6
For ZF6HP19, ZF6HP26 and 6R80 units with .669" (16.98mm) shafts only.
- Width: 0.393"
- Housing Bore: 0.788"
- Shaft Dia.: 0.669"
- Bushing Style: Precision
- Material: Bimetal
The OE bushings used at the input-to-intermediate shaft and intermediate-to-output shaft in ZF6HP19/26 and Ford 6R80 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, pressure control codes, and loss of correct pressure to the B-clutch. Sonnax input/output shaft bushing 95030-05 features superior wear characteristics, eliminating premature deterioration for worry-free operation.
- Upgraded material composition outperforms OE bushing
Click here to view PDF if instructions do not appear below.