- Bushing failure
- Bushing wear
- Harsh downshifts
- Harsh TCC apply
- TCC apply & release concerns
OE bushing material composition allows premature wear.
Install improved Sonnax front stator support bushing to restore critical clearances and resist untimely wear.
Front Stator Support Bushing
Package Quantity: 5
- Width: 0.591"
- Housing Bore: 1.205"
- Shaft Dia.: 1.085"
- Bushing Style: Precision
- Material: Steel-Backed Alloy
OE front stator support bushings in ZF8HP45 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to TCC apply and release concerns and harsh downshifts when TCC is engaged below 20 mph. Sonnax front stator support bushing 35036 restores worry-free operation.
- Upgraded material composition outperforms OE bushing
- Superior wear characteristics eliminate premature deterioration
Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.