Symptoms:

  • E Clutch burned
  • B Clutch burned
  • Gear ratio & solenoid codes
  • Bushing wear
  • Bushing failure

Cause:

OE bushing material composition allows premature wear.

Correction:

Install improved Sonnax bushing kit to restore critical clearances and resist untimely wear.

Warning:

Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

ZF6HP26, ZF6HP28

Bushing Kit
Part No. 95030-26K

Fits units with input shaft bushing journal diameters of 1.022" (25.97mm) & 1.180" (29.96mm).

View Instructions Find a Distributor

OE bushings in ZF6HP26 and ZF6HP28 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, loss of correct pressure to the E-clutch and B-clutch, and gear ratio or solenoid codes. Sonnax offers improved bushing kit 95030-26K to restore worry-free operation.

  • Upgraded material composition outperforms OE bushing
  • Superior wear characteristics eliminate premature deterioration
  • Rear Stator Support Bushing Fits 1.022" (25.97mm) Input Shaft Journal
  • Rear Stator Support Bushing Fits 1.180" (29.96mm) Input Shaft Journal
  • "A" Drum Front Bushing Fits 2.353" (59.77mm) Stator Shaft Journal
  • "A" Drum Rear Bushing Fits 1.967" (49.97mm) Stator Shaft Journal
  • Input/Output Shaft Bushing (2) Fits .669" (16.98mm) Intermediate "E" Shaft Journal
  • Sun Gear Shaft Bushing (2) Fits .952" (24.17mm) Intermediate "E" Shaft Journal
  • Sun Gear Shaft Bushing (2) Fits .991" (25.17mm) Intermediate "E" Shaft Journal
  • "B" Clutch Bushing (2) Fits 1.337" (33.97mm) Sun Gear Shaft Journal
  • Bushing Style: Precision
  • Material: Steel-backed alloy
  • ZF6HP26, ZF6HP28 Bushing Kit 95030-26K