sonnax-black Facebook-color LinkedIn-color maillink printlink r_and_r_only SERVOFIX-logo-web Twitter-color VBFIX-logo-web video-logo-web warranty_only Youtube-color

Roller Bearing Slip Yoke
Part No. T3-3-6081H

Fits Powerglide, 350 and 350C. Also fits Saginaw 3- and 4-Speed, Muncie M20, M21 and M22 with 27-tooth spline. For use with roller bearing tail housing.

Roller bearings are typically used in tail housings found in extreme-performance applications, requiring a slip yoke that is capable of standing up to both the hardness of the bearing and punishing competitive conditions. Sonnax performance slip yoke T3-3-6081H is specifically designed for use with tail housings that are equipped with a roller bearing instead of a bushing. It is forged from rugged chromoly steel, precision machined and expertly tempered to be able to withstand the most severe performance environments. Perfectly suited for all high-horsepower and torque capacity vehicles, whether at the strip, on the street or at the track.

  • Can be used with single or double-roller bearing applications
  • Uniquely engineered for superior strength and durability
  • 100% leak tested to 40 psi
  • Material: Forged Chromoly
  • Counter Bore (Y/N): N
  • Spline Type: Full
  • Driveline Series: 1350
  • CL to End Length: 5.810"
  • Length: 6.680"
  • Spline Tooth Count: 27
  • Seal Dia.: 1.500"
  • Barrel Length: 3.890"
  • Weight (lbs): 2.320

May 09, 2017

Level Up with Sonnax: 5 Key Powerglide Transmission Areas to Upgrade for Optimum Performance

Topics: Transmission GM Powerglide Transmission

Read Now

Contact your local driveline shop for availability. If you need assistance finding a shop, or if you would like to become a distributor, fill out the form and a Sonnax driveline product specialist will contact you.

  • T3 3 6081h

How to Measure a Slip Yoke

Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.

  1. Spline Count
  2. Seal Dia.
  3. Length (Centerline to End)
  4. Barrel Length

How to Determine a U-joint Series

 
U-Joint Series
E
U-Joint Width (inches)
F
Cap Diameter (inches)
3R 2.562 1.125
1310 3.219 1.062
1330 3.622 1.062
1350 3.622 1.188
1410 4.188 1.188
1480 4.188 1.375
1485 4.178 1.375
1550/1555 4.964 1.375 outside snap rings

Measure the inside snap ring, indicated on the diagram as G.

Learn more about Sonnax slip yokes