Published 06-2010, by Jeff Parlee
In 2005, Dodge started using a transmission throttle valve actuator (TTVA) instead of a TV cable on the 48RE Diesel 2500 and 3500 Ram trucks. The actuator, mounted to the case above the throttle valve shaft, includes two potentiometers which provide input to the ECM as well as a DC motor that responds to ECM output. The bottom of the TTVA shaft features a D-shaped opening that fits onto the throttle shaft, allowing the actuator to mechanically stoke the TV valve and ultimately control transmission throttle pressure.
There are no adjustments for the TTVA, it must be initialized when replaced or removed and reinstalled on the transmission. Every time the ignition is cycled on, the ECM performs the internal calibration procedure to find the current "zero" position. To initialize the TTVA, the ignition must be held in the "on" position for at least 30 seconds.
During the calibration procedure, the ECM is looking for at least 48 degrees of movement from minimum to maximum span and to establish a minimum range value. Both of these parameters can be affected by the throttle shaft adjustment bolt on the pressure regulator spring retaining bracket. The distance between the bracket and the inside edge of the adjustment bolt head should be .905". A shorter distance will not allow the TV shaft to travel far enough to satisfy calibration parameters and will set a code P1751 and/or P1752.
Here is where you can easily get into trouble.
Some of the cable-activated throttle valve
brackets have as little as .820" between the
bracket and the inside of the adjustment bolt
head. Using the cable type bracket set up in
a TTVA equipped unit without changing
the setting on the adjustment bolt can set the
same codes.
Transmission Throttle Valve Actuator Code List:
A special thanks to Mike Ware of Transware Transmission in Concord, Ontario for his help with the research on this article.
Sonnax Industries is an Employee-Owned Company
1 Automatic Drive · Bellows Falls, VT ·
05101-0440 · U.S.A.
800-843-2600 ·
802-463-9722
Sonnax Industries is an ISO 9001: 2008 Registered Company
© 2012 Sonnax Industries, Inc.