Jatco/Nissan RE5R05A Solenoid Identification
Valve Body Xpress
Solenoid Identification
- N/V: Normally venting
- N/A: Normally Applied
- N/C: Normally Closed
Low Coast Solenoid Identification
All Nissan valve bodies use high resistance, low coast solenoids. The Bosch, Nachi and Mitsubishi high resistance solenoids can be freely interchanged. Always check resistance on Infiniti valve bodies to determine the correct low coast solenoid.| Early "Infiniti Only" (Used until August 2005) |
Bosch Type |
Nachi Type |
Mitsubishi Type |
|---|---|---|---|
 |
 |
 |
 |
| Resistance = 10-15 Ohms. | Resistance = 20-40 Ohms. | Resistance = 20-40 Ohms. | Resistance = 20-40 Ohms. |
| Brown Plastic at O-Ring Area | Black Plastic at O-Ring Area | Black Plastic at O-Ring Area | White Plastic at O-Ring Area |
Related Units
Related Parts
Required
Recommended
RE5R05A
Remanufactured Valve Body NIS501
1st Design, 10–15 Ohm Low Coast Solenoid. Infinity Models Only.
Required
Recommended
RE5R05A
Remanufactured Valve Body NIS502
1st Design, 20–40 Ohms Low Coast Solenoid. Nissan Models Only.
Required
Recommended
RE5R05A
Remanufactured Valve Body NIS504
2nd Design, 10–15 Ohms Low Coast Solenoid. Infinity Models Only.
Required
Recommended
RE5R05A
Remanufactured Valve Body NIS505
2nd Design, 20–40 Ohms Low Coast Solenoid. Nissan Models Only.
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.