ZF6HP19/26/32 (Generation 1), Ford 6R60, 6R75, 6R80, ZF6HP21/28/34 (Generation 2) Identification Guide

Sonnax

Questions? Email Sonnax Tech Support about this article.

Valve components differ between Generation 1 (ZF6HP19, ZF6HP26, ZF6HP32), Ford 6R60/6R75/6R80 and Generation 2 (ZF6HP21, ZF6HP28, ZF6HP34) valve bodies. Please use this identification guide to determine which generation you have to ensure correct valve kits and components are selected for your rebuild.

Generation 1 (ZF6HP19, 26 & 32),
Ford 6R60/6R75/6R80

Generation 2 (ZF6HP21, 28 & 34)

1. Identify!

1st Generation Case Side Includes 19, 26 & 322nd Generation Case Side Includes 21, 28 & 34

2. Verify

Verify OE dimensions indicated in order to select correct Sonnax parts.

Different Sized Pressure Regulator Valves and SleevesPressure Regulator Valves and Sleeves Cannot Be Interchanged

Generation 1 (ZF6HP19, 26 & 32) with 053 Separator Plate


NOTE: Some BMW 6 & 7 series with six accumulators have a different sized pressure regulator valve. This is most commonly seen on the A053/B053 separator plate applications.

CAUTION: Some valve sizes and locations differ from non-053 plate Generation 1 units. Reference 053 plate vacuum test guide and exploded view for details.

Related Part(s)
Related Unit(s)
Subject(s) Included
  • Identification Guides

While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.

Was this helpful? No

Thanks for your feedback! Contact Sonnax tech support for assistance.

Thanks for your feedback!