Warning:
Heat from welding can cause the bearing riding surface to distort. To assure flatness of the bearing riding surface, perform a 2.705" dia. clean-up cut on the mating surface after welding impeller hub into place. Surface finish must be a 63Ra or better.
ZF4HP16
Impeller Hub
Part No. ZF-90-1G
Sonnax impeller hub ZF-90-1G replaces worn or damaged impeller hubs when rebuilding ZF4HP16 (245mm) torque converters and is forged from 1045 steel for added strength and durability.
- Pump Drive Style: Slots
- Material: Hardened Steel
- Hub Mount: Flanged
- Journal Dia.: 1.575"
- Assembled Height: 1.801"
- Height: 2.008"
- Flange Outer Dia.: 2.705"
- Flange Pilot Dia.: 2.510"
Where to Buy
- Existing Customers: Contact your sales representative.
- New Customers: Fill out the form and a sales representative will contact you.
Related Sonnax Parts
Required
Recommended
ZF4HP16, ZF5HP19 (Captive Clutch), ZF5HP19 (Single Friction), ZF5HP24, ZF6HP19, 245mm, ZF6HP26, 255mm, ZF6HP26, 260mm, ZF8HP45, ZF8HP55, ZF8HP70
Thrust Bearing FS-N-4
- Bearing Style: Enclosed
- Material: Hardened Steel
- Inner Dia.: 1.496"
- Thickness: 0.181"
- Outer Dia.: 2.440"