August 20, 2008
6R60, 6R75W, ZF4HP22, A999, ZF4HP24, ZF5HP19 (Captive Clutch), ZF5HP19 (Single Friction), ZF5HP24, ZF5HP30, ZF6HP19, 245mm, ZF6HP26, 255mm, ZF6HP26, 260mm
Radial Lip Seal
Part No. FS-O-27V
Sonnax offers fluorocarbon radial lip seal FS-O-27V with metal case O.D. for listed ZF and Ford units.
Caution should be taken when using radial lip seal FS-O-27V in ZF units to be sure it is installed in the correct direction. In later units, the OE part has a flange to prevent incorrect installations. The Sonnax part does not have the flange. The correct installation for the FS-O-27V in both later cover and early turbine hub applications is to place them so that the cavity side of the seal is 'up', towards the impeller.
- Material: Fluorocarbon
- Housing Bore: 0.945"
- Shaft Dia.: 0.709"
Where to Buy
- Existing Customers: Contact your sales representative.
- New Customers: Fill out the form and a sales representative will contact you.
Related Sonnax Parts
Required
Recommended
ZF6HP19, 245mm, ZF6HP26, 255mm, ZF6HP26, 260mm
Ball Bearing FS-N-5
- Bearing Style: Ball bearing
- Material: Hardened Steel
- Inner Dia.: 1.378"
- Thickness: 0.276"
- Outer Dia.: 1.850"
Required
Recommended
ZF5HP24
Clutch Plate FS-CP-3
- Tab Style: Flat External
- Inner Dia.: 8.379"
- Thickness: 0.122"
- Outer Dia.: 10.217"
- Tab Count: 24
Required
Recommended
ZF6HP26, 260mm
Clutch Plate FS-CP-56BW
- Tab Style: Bent External
- Thickness: 0.157"
- Inner Dia.: 8.189"
- Outer Dia.: 10.586"
- Tab Count: 24
Required
Recommended
ZF6HP19, 245mm
Clutch Plate FS-CP-7BW
- Tab Style: Bent External
- Thickness: 0.157"
- Inner Dia.: 7.874"
- Outer Dia.: 9.854"
- Tab Count: 24
Required
Recommended
ZF Miscellaneous, ZF6HP26, 280mm
Clutch Plate ZF-CP-6
- Tab Style: Bent External
- Thickness: 0.160"
- Inner Dia.: 8.785"
- Outer Dia.: 11.257"
- Tab Count: 24
Required
Recommended
Required
Recommended
ZF5HP19 (Captive Clutch), ZF5HP24
Repair Plate FS-WS-1
- Material: Steel
- Thickness: 0.100"
- Outer Dia.: 3.556"
- Inner Dia.: 2.245"
Required
Recommended
ZF6HP26, 260mm
Repair Plate FS-WS-2
- Material: Steel
- Thickness: 0.100"
- Inner Dia.: 2.173"
- Outer Dia.: 3.556"
Required
Recommended
ZF4HP22, A999
Turbine Hub FS-HT-7HS
- Material: Steel
- Internal Spline Tooth Count: 27
- Assembled Height: 0.718"