Impeller Hub GM-90CM-32G
In GM-RK-2 & GM-RK-2S
- Material: Chromoly
- Hub Mount: Flanged
- Pump Drive Style: Slots
- Assembled Height: 2.670"
- Journal Dia.: 1.875"
- Flange Outer Dia.: 3.620"
- Height: 2.936"
Impeller
Adapter Ring GM-WS-16
In GM-RK-2. Adapts 8" to 10".
- Material: Steel
- Thickness: 0.740"
- Inner Dia.: 9.500"
- Outer Dia.: 10.130"
Thrust Bearing CH-N-1
2 Required
- Bearing Style: Enclosed
- Material: Hardened Steel
- Inner Dia.: 1.900"
- Thickness: 0.181"
- Outer Dia.: 2.821"
Stator Cap GM-WA-15
Use with GM-MD-3, GM-MD-10S, GM-MD-9-3 or GM-R-8
- Material: Aluminum
- Outer Notch Count: 4
- Outer Dia.: 3.245"
- Inner Dia.: 1.690"
- Total Thickness: 0.280"
- Functional Thickness: 0.140"
Stator Cap GM-WA-26
Four notches Use with GMFD-MD-1 or GMFD-MD-10S
- Material: Aluminum
- Outer Dia.: 3.245"
- Inner Dia.: 1.750"
- Total Thickness: 0.250"
- Functional Thickness: 0.109"
Stator
Clutch Eliminator GM-R-8
Not for street use.
- Length: 1.010"
- Outer Dia.: 3.250"
- Internal Spline Tooth Count: 27
Mechanical Diode® GM-MD-9-3
Use of this mechanical diode requires a 3.25" bore stator like the Opel or Sonnax GM-ST-082 or GM-ST-086.
- Material: Steel
- Internal Spline Tooth Count: 27
- Design Strut Count: 9
- Engagement Strut Count: 3
Mechanical Diode® GMFD-MD-1
Ford spline
- Internal Spline Tooth Count: 32
- Design Strut Count: 5
- Engagement Strut Count: 1
Mechanical Diode® GM-MD-10S
Use of this mechanical diode requires a 3.25" bore stator like the Opel or Sonnax GM-ST-082 or GM-ST-086.
- Material: Steel
- Internal Spline Tooth Count: 27
- Design Strut Count: 10
- Engagement Strut Count: 2
Mechanical Diode® GM-MD-3
Use of this mechanical diode requires a 3.25" bore stator like the Opel or Sonnax GM-ST-082 or GM-ST-086.
- Material: Steel
- Internal Spline Tooth Count: 27
- Design Strut Count: 5
- Engagement Strut Count: 1
Mechanical Diode® GMFD-MD-10S
Fits stators with 3.25" bores and Ford 32-tooth stator tube splines.
- Internal Spline Tooth Count: 32
- Design Strut Count: 10
- Engagement Strut Count: 2
Sprag Cartridge GM-CS-3
Sprag cartridge, fits 8" Opel-style 3.255" stator bore, 27-tooth GM spline
- Material: Steel
- Internal Spline Tooth Count: 27
Outer Stator Race GM-R-6
Replacement for GM-CS-3
- Material: Hardened Steel
- Thickness: 0.750"
- Outer Dia.: 3.247"
- Inner Dia.: 2.614"
Inner Stator Race GM-HR-4
Replacement for GM-CS-3
- Material: Hardened Steel
- Internal Spline Tooth Count: 27
- Length: 0.936"
- Outer Dia.: 1.958"
Stator Cap GM-WS-23
Replacement for GM-CS-3
- Material: Steel
- Outer Notch Count: 4
- Outer Dia.: 3.245"
- Inner Dia.: 1.690"
- Total Thickness: 0.378"
- Functional Thickness: 0.140"
-
Tooling:
- MI-SP-4
Sprag MI-SP-4
Replacement for GM-CS-3
- Sprag Drag Clip Count: 11
- Sprag Element Count: 22
- Race Outer Dia.: 2.614"
- Race Inner Dia.: 1.958"
- Width: 0.750"
- Torque Capacity: 807
Stator Cap GM-WS-7
Use with GMFD-MD-1 or GMFD-MD-10S
- Material: Steel
- Outer Notch Count: 4
- Outer Dia.: 3.245"
- Inner Dia.: 1.690"
- Total Thickness: 0.280"
- Functional Thickness: 0.140"
Stator Cap GM-WS-28
Four notches
- Material: Steel
- Outer Dia.: 3.245"
- Inner Dia.: 1.750"
- Total Thickness: 0.312"
- Functional Thickness: 0.171"
-
Tooling:
- GMFD-MD-1
Turbine
Bearing Race MI-N-16
- Material: Hardened Steel
- Thickness: 0.031"
- Inner Dia.: 1.375"
- Outer Dia.: 2.062"
Thrust Bearing MI-N-15
- Bearing Style: Open
- Material: Hardened Steel
- Inner Dia.: 1.375"
- Thickness: 0.078"
- Outer Dia.: 2.062"
Thrust Washer FD-WP15-OE
In GM-RK-2 & GM-RK-2S
- Material: Plastic
- Thickness: 0.188"
- Inner Dia.: 1.380"
- Outer Dia.: 2.750"
Front Cover Bushing GM-B-3
In GM-RK-2 & GM-RK-2S
- Material: Steel-backed alloy
- Bushing Style: Precision
- Housing Bore: 1.620"
- Width: 0.500"
- Shaft Dia.: 1.375"
Washer GM-WS-125
Replacement washer for GM-PI-125K.
- Material: Steel
- Thickness: 0.125"
- Inner Dia.: 0.443"
- Outer Dia.: 1.000"
Washer GM-WS-250
Replacement washer for GM-PI-250K.
- Material: Steel
- Thickness: 0.250"
- Inner Dia.: 0.443"
- Outer Dia.: 1.000"
Washer GM-WS-375
Replacement washer for GM-PI-375K.
- Material: Steel
- Thickness: 0.375"
- Inner Dia.: 0.443"
- Outer Dia.: 1.000"
