Transmission Parts Mercedes 722.6 Pump Bushing
Print Share View Instructions

Symptoms:

  • Bushing spins in housing
  • Pump leaks
  • Pump damaged

Cause:

Drive plate, converter pilot or hub run-out causes excessive load on the OE bushing

Correction:

Sonnax oversized finish-in-place bushing allows the salvage of damaged pumps while giving precise bushing-to-shaft clearance.

722.6

Pump Bushing
Part No. 68004-02

Finish-in-Place. Oversized O.D. Also fits 722.3 and 722.5 units.

View Instructions Find a Distributor

In Mercedes 722.3, 722.5 and 722.6 pumps, severe load between the pump housing and bushing can cause hydraulic leaks and low pressure. Sonnax oversized finish-in-place pump bushing 68004-02 allows salvage of costly pump housings and allows the rebuilder to establish precise shaft-to-bushing clearance.

  • Finish-in-place bushing allows rebuilders to set more precise clearances between the bushing and shaft
  • Allows salvage of pumps with damaged bushing bores
  • Material: Bimetal
  • Bushing Style: Finish-in-Place
  • Width: 0.550"
  • Shaft Dia.: 1.678"
  • Housing Bore: 2.000"
  • 722.6 Pump Bushing 68004-02
  • 722.6 Pump Bushing 68004-02

Related Sonnax Parts

Required

Recommended

722.6 Pump Bushing 68004-01

722.6

Pump Bushing 68004-01

Fits '96-later

  • Material: Bimetal
  • Bushing Style: Precision
  • Housing Bore: 1.810"
  • Shaft Dia.: 1.692"
  • Width: 0.550"
    Helps cure:
  • Bushing wear
  • Bushing failure
↑