Slip Yoke
Part No. T3-3-2431CBHP

TH400, 4L80-E, Muncie M20, 21 & 22, BorgWarner T10

Sonnax performance forged slip yoke T3-3-2431CBHP for 1350 series u-joints is designed specifically for transmission output shafts that are threaded on the output end. The Sonnax yoke features a 1/2" counter bore to convert these shafts from a bolt-on style to a slip-style yoke. It's an ideal upgrade for superior strength and durability in high horsepower and high torque capacity applications, from street car, to street rod, drag strip, to dirt oval track.

Talk with a transmission builder or driveline shop to verify your vehicle's output shaft style. This slip yoke fits a variety of applications, including those listed here.

  • Spline Type: Counterbore
  • U-Joint Series: 1350
  • Material: Forged Chromoly
  • Weight: 3.040lbs
  • Spline Tooth Count: 32
  • Journal Dia.: 1.886"
  • CL to End Length: 5.500"
  • Length: 6.370"
  • Length of Counter Bore: 0.550"
  • Barrel Length: 3.880"

Where to Buy

Contact your Sonnax Performance Slip Yokes Distributor or your local driveline shop for availability. If you need assistance finding a shop, fill out the form and a Sonnax driveline product specialist will contact you.

  •  Slip Yoke T3-3-2431CBHP

Videos

How to Choose the Right Slip Yoke

Learn All About Sonnax Slip Yokes

How to Measure a Slip Yoke

Measure OE slip yoke with a precision tool to determine which Sonnax yoke you need. Length, journal size and U-joint series are critical dimensions requiring accurate measurements.

  • Some slip yokes have missing splines — include the missing spline in your count or count the splines on the transmission output shaft.
  • Also check if the OE yoke has a counterbore and whether the transmission tail housing uses a bushing or roller bearing.
  • A Spline Count
  • B Journal Dia.
  • C Length (Centerline to End)
  • D Barrel Length
  • E U-Joint Width*
  • F U-Joint Cap Diameter*

*U-joint bores in yoke will be slightly larger than the actual U-joint dimensions given in the chart below.

ASpline Count
CLength (Centerline to End)CounterboreBBarrel LengthDJournalDiameter
FEU-Joint SeriesE = U-Joint WidthF = U-Joint Cap Diameter

 

How to Determine a U-Joint Series

 
U-Joint Series
E
U-Joint Width (inches)
F
U-Joint Cap Diameter (inches)
3R 2.562 1.125
1310 3.219 1.062
1330 3.622 1.062
1350 3.622 1.188
1410 4.188 1.188
1480 4.188 1.375
1485 4.178 1.375
1550/1555 4.964 1.375 outside snap rings

Measure the inside snap ring, indicated on the diagram as G.

FGE

Need help choosing a slip yoke? Watch this video.