July 20, 2016
Sonnax performance slip yoke T2-3-2431CBHP is designed specifically for transmission output shafts that are threaded on the output end. This forged chromoly yoke features a counterbore to convert these shafts from a bolt-on style to a slip-style yoke. Being compatible with a 1330 u-joint, it's possible to use a solid (non-greasable) joint, which is stronger than a 1350 to 1330 conversion joint. It's an ideal upgrade for superior strength and durability, whether at the strip, on the street or at the track.
Talk with a transmission builder or driveline shop to verify your vehicle's output shaft style. This slip yoke fits a variety of applications, including those listed here.
Contact your Sonnax Performance Slip Yokes Distributor or your local driveline shop for availability. If you need assistance finding a shop, fill out the form and a Sonnax driveline product specialist will contact you.
Learn All About Sonnax Slip Yokes
Measure OE slip yoke with a precision tool to determine which Sonnax yoke you need. Centerline to end length, journal size and U-joint series are critical dimensions requiring accurate measurements.
*U-joint bores in yoke will be slightly larger than the actual U-joint dimensions given in the chart below.
U-Joint Width (inches)
U-Joint Cap Diameter (inches)
|1550/1555||4.964||1.375 outside snap rings|
Measure the inside snap ring, indicated on the diagram as G.