WARNING!
Ensure transmission output shaft has enough spline length to compensate for the extra yoke travel. Output shaft modification may be necessary to prevent bottom-out.
Extended Length Slip Yoke
Part No. T2-3-6081HP8XL
Fits Powerglide, 200-4R, 4L60, 4L60-E, 350. Also fits Muncie & Brinn units.
Extended length slip yokes help compensate for extreme-travel rear suspension applications, or driveshaft lengths that are slightly shorter than necessary. Sonnax extended length performance slip yoke T2-3-6081HP8XL is forged from a chromoly billet to provide superior strength and performance for dirt oval track racing with above listed transmissions.
- Material: Forged Chromoly
- Counter Bore (Y/N): N
- Spline Type: Full
- Driveline Series: 1310
- Weight (lbs): 2.330
- CL to End Length: 8.000"
- Length: 8.760"
- Spline Tooth Count: 27
- Seal Dia.: 1.503"
- Barrel Length: 6.100"
March 29, 2017
Transmission Report: Sonnax Voted Tops for Parts & Tools!
Topics: Transmission Report Newsletters Transmission GM 4T65-E Transmission 4L70-E Transmission 4L60-E Transmission 4L65-E Transmission 4L80-E Transmission
Read NowContact your local driveline shop for availability. If you need assistance finding a shop, or if you would like to become a distributor, fill out the form and a Sonnax driveline product specialist will contact you.
How to Measure a Slip Yoke
Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.
- Spline Count
- Seal Dia.
- Length (Centerline to End)
- Barrel Length
How to Determine a U-joint Series
| U-Joint Series |
E U-Joint Width (inches) |
F Cap Diameter (inches) |
|---|---|---|
| 3R | 2.562 | 1.125 |
| 1310 | 3.219 | 1.062 |
| 1330 | 3.622 | 1.062 |
| 1350 | 3.622 | 1.188 |
| 1410 | 4.188 | 1.188 |
| 1480 | 4.188 | 1.375 |
| 1485 | 4.178 | 1.375 |
| 1550/1555 | 4.964 | 1.375 outside snap rings |
Measure the inside snap ring, indicated on the diagram as G.
Related Sonnax Parts
Roller Bearing Slip Yoke T3-3-6081H
Fits Powerglide, 350 and 350C. Also fits Saginaw 3- and 4-Speed, Muncie M20, M21 and M22 with 27-tooth spline. For use with roller bearing tail housing.
- Material: Forged Chromoly
- Counter Bore (Y/N): N
- Spline Type: Full
- Driveline Series: 1350
- CL to End Length: 5.810"
- Length: 6.680"
- Spline Tooth Count: 27
- Seal Dia.: 1.500"
- Barrel Length: 3.890"
- Weight (lbs): 2.320