1
2
Bushing GMFD-B-1
- Material: Steel-backed alloy
- Bushing Style: Precision
- Housing Bore: 1.740"
- Width: 0.610"
- Shaft Dia.: 1.622"
3
Impeller Hub GMFD-90-1G
- Pump Drive Style: Flats
- Material: Hardened Steel
- Hub Mount: Flanged
- Journal Dia.: 2.059"
- Assembled Height: 1.530"
- Height: 1.720"
- Flange Outer Dia.: 3.500"
4
Impeller
5
Thrust Bearing GMFD-N-1
- Bearing Style: Enclosed
- Material: Hardened Steel
- Inner Dia.: 2.402"
- Thickness: 0.213"
- Outer Dia.: 3.365"
- Flange Outer Dia.: 3.405"
6
Stator
7
Accordion Spring (10 Required)
8
Roll (.315" Dia. X .365" long, 10 required)
9
Inner Stator Race (30-Tooth internal spline, 2.028" O.D., .635" length)
10
Stator Cap GMFD-WA-2
For use in units with low-stall stators and stator caps with eight oil grooves. For use in units with low-stall stators and stator caps with eight oil grooves.
- Material: Aluminum
- Outer Dia.: 3.465"
- Inner Dia.: 1.700"
- Thickness: 0.340"
- Outer Notch Count: 4
Stator Cap GMFD-WA-1
For use in units with high-stall stators and stator caps with four oil grooves.
- Material: Aluminum
- Outer Dia.: 3.465"
- Inner Dia.: 1.500"
- Thickness: 0.365"
- Outer Notch Count: 4
Stator Cap (Aluminum, 3.467" O.D. x .370" tall, 4 notches)
11
Wear Plate GMFD-WS-1
For use in units with high-stall stators and stator caps with four oil grooves. For use in units with high-stall stators and stator caps with four oil grooves.
- Material: Steel
- Tang Count: 8
- Outer Dia.: 2.953"
- Inner Dia.: 1.902"
- Thickness: 0.031"
12
Thrust Bearing CH-N-1
Optional Replacement
- Bearing Style: Enclosed
- Material: Hardened Steel
- Inner Dia.: 1.900"
- Thickness: 0.181"
- Outer Dia.: 2.821"
Thrust Bearing GMFD-N-2
OE Replacement
- Bearing Style: Enclosed
- Material: Hardened Steel
- Inner Dia.: 1.896"
- Thickness: 0.179"
- Outer Dia.: 2.869"
13
Rivet GMFD-RV-1
12 Required
- Rivet Head: Flat
- Rivet Type: Solid
- Head Dia.: 0.380"
- Length: 0.380"
- Shank Dia.: 0.238"
14
Turbine
15
Turbine Hub
16
17
18
Damper Assembly
19
20
Thrust Washer GMFD-WP-2
- Material: Vespel®
- Thickness: 0.136"
- Inner Dia.: 1.010"
- Outer Notch Count: 8
- Outer Dia.: 1.484"
Thrust Washer GMFD-WP-2T
- Material: Vespel®
- Outer Dia.: 1.484"
- Inner Dia.: 1.010"
- Thickness: 0.154"
- Outer Notch Count: 8
Thrust Washer GMFD-WP-1T
- Material: Plastic
- Outer Dia.: 1.484"
- Inner Dia.: 1.010"
- Thickness: 0.154"
- Outer Notch Count: 8
Thrust Washer GMFD-WP-1
- Material: Plastic
- Thickness: 0.136"
- Outer Notch Count: 8
- Outer Dia.: 1.484"
- Inner Dia.: 1.010"
21
Front Cover
22