Click on any bold item to see available Sonnax products.

Print part listing
Gm 6t70 6t75 assembly lines
1
Mi hc r

Hub Cover MI-HC-R

  • Material: Plastic
  • Color: Red
  • For Hub Dia.: 2"
2
Gmfd b 1

Bushing GMFD-B-1

  • Material: Steel-backed alloy
  • Bushing Style: Precision
  • Housing Bore: 1.740"
  • Width: 0.610"
  • Shaft Dia.: 1.622"
3
Gmfd 90 1g

Impeller Hub GMFD-90-1G

  • Pump Drive Style: Flats
  • Material: Hardened Steel
  • Hub Mount: Flanged
  • Journal Dia.: 2.059"
  • Assembled Height: 1.530"
  • Height: 1.720"
  • Flange Outer Dia.: 3.500"
4
Impeller
5
Gmfd n 1

Thrust Bearing GMFD-N-1

  • Bearing Style: Enclosed
  • Material: Hardened Steel
  • Inner Dia.: 2.402"
  • Thickness: 0.213"
  • Outer Dia.: 3.365"
  • Flange Outer Dia.: 3.405"
6
Stator
7
Accordion Spring (10 Required)
8
Roll (.315" Dia. X .365" long, 10 required)
9
Inner Stator Race (30-Tooth internal spline, 2.028" O.D., .635" length)
10
Gmfd wa 2

Stator Cap GMFD-WA-2

For use in units with low-stall stators and stator caps with eight oil grooves. For use in units with low-stall stators and stator caps with eight oil grooves.

  • Material: Aluminum
  • Outer Dia.: 3.465"
  • Inner Dia.: 1.700"
  • Thickness: 0.340"
  • Outer Notch Count: 4
Gmfd wa 1

Stator Cap GMFD-WA-1

For use in units with high-stall stators and stator caps with four oil grooves.

  • Material: Aluminum
  • Outer Dia.: 3.465"
  • Inner Dia.: 1.500"
  • Thickness: 0.365"
  • Outer Notch Count: 4
Stator Cap (Aluminum, 3.467" O.D. x .370" tall, 4 notches)
11
Shim (2.953" O.D x .032" thick, 8 I.D. tangs)
Gmfd ws 1

Wear Plate GMFD-WS-1

For use in units with high-stall stators and stator caps with four oil grooves. For use in units with high-stall stators and stator caps with four oil grooves.

  • Material: Steel
  • Tang Count: 8
  • Outer Dia.: 2.953"
  • Inner Dia.: 1.902"
  • Thickness: 0.031"
12
Gmfd n 2

Thrust Bearing GMFD-N-2

OE Replacement

  • Bearing Style: Enclosed
  • Material: Hardened Steel
  • Inner Dia.: 1.896"
  • Thickness: 0.179"
  • Outer Dia.: 2.869"
Ch n 1

Thrust Bearing CH-N-1

Optional Replacement

  • Bearing Style: Enclosed
  • Material: Hardened Steel
  • Inner Dia.: 1.900"
  • Thickness: 0.181"
  • Outer Dia.: 2.821"
13
Gmfd rv 1 new

Rivet GMFD-RV-1

12 Required

  • Rivet Head: Flat
  • Rivet Type: Solid
  • Head Dia.: 0.380"
  • Length: 0.380"
  • Shank Dia.: 0.238"
14
Turbine
15
Gmfd ht 1hs

Turbine Hub GMFD-HT-1HS

  • Material: Steel
  • Internal Spline Tooth Count: 27
16
Gmfd o 1v

Radial Lip Seal GMFD-O-1V

  • Material: Fluorocarbon
  • Housing Bore: 0.906"
  • Shaft Dia.: 0.639"
17
Gmfd o 2v

O-Ring GMFD-O-2V

  • Material: Fluorocarbon
  • Cross Section: 0.103"
  • Inner Dia.: 1.174"
18
Damper Assembly
19
Bwfristionringshts

Friction Ring B45930HTS

  • Material: HTS
  • Thickness: 0.045"
  • Inner Dia.: 9.200"
  • Outer Dia.: 10.200"
S20250wc

Friction Ring S20930WC

  • Material: WC
  • Outer Dia.: 10.200"
  • Inner Dia.: 9.200"
  • Thickness: 0.020"
B45930hte

Friction Ring B45930HTE

  • Material: HTE
  • Outer Dia.: 10.200"
  • Inner Dia.: 9.200"
  • Thickness: 0.045"
B66930hte

Friction Ring B66930HTE

  • Material: HTE
  • Outer Dia.: 10.200"
  • Inner Dia.: 9.200"
  • Thickness: 0.066"
Bwfristionringshts

Friction Ring B66930HTS

  • Material: HTS
  • Thickness: 0.066"
  • Inner Dia.: 9.200"
  • Outer Dia.: 10.200"
20
Gmfd wp 1t

Thrust Washer GMFD-WP-1T

  • Material: Plastic
  • Outer Dia.: 1.484"
  • Inner Dia.: 1.010"
  • Thickness: 0.154"
  • Outer Notch Count: 8
Gmfd wp 1

Thrust Washer GMFD-WP-1

  • Material: Plastic
  • Thickness: 0.136"
  • Outer Notch Count: 8
  • Outer Dia.: 1.484"
  • Inner Dia.: 1.010"
Gmfd wp 2

Thrust Washer GMFD-WP-2

  • Material: Vespel®
  • Thickness: 0.136"
  • Inner Dia.: 1.010"
  • Outer Notch Count: 8
  • Outer Dia.: 1.484"
Gmfd wp 2t

Thrust Washer GMFD-WP-2T

  • Material: Vespel®
  • Outer Dia.: 1.484"
  • Inner Dia.: 1.010"
  • Thickness: 0.154"
  • Outer Notch Count: 8
21
Front Cover
22
Hex Head Cap Screw (M10 x 1.50 x 25mm)