Slip Yoke
Part No. T3-3-2431CBH

TH400, 4L80-E, Powerglide with 32-spline. For use with roller bearing tail housing.

Roller bearings are typically used in tail housings found in extreme-performance applications, requiring a slip yoke that is capable of standing up to both the hardness of the bearing and punishing competitive conditions. Sonnax performance slip yoke T3-3-2431CBH is specifically designed for use with tail housings that are equipped with a roller bearing instead of a bushing. It is forged from rugged chromoly steel, precision machined, through-hardened and expertly tempered to be able to withstand the most severe performance environments. Perfectly suited for all high-horsepower and torque capacity vehicles, whether at the strip, on the street or at the track.

  • Material: Forged 4340 Chromoly
  • Counter Bore (Y/N): Yes
  • Driveline Series: 1350
  • CL to End Length: 5.500"
  • Weight (lbs): 2.800lbs
  • Length: 6.370"
  • Spline Tooth Count: 32
  • Barrel Length: 3.800"
  • Journal Dia.: 1.888"

Where to Buy

Contact your Sonnax Performance Slip Yokes Distributor or your local driveline shop for availability. If you need assistance finding a shop, fill out the form and a Sonnax driveline product specialist will contact you.

  •  Slip Yoke T3-3-2431CBH

How to Measure a Slip Yoke

Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.

  1. Spline Count
  2. Journal Dia.
  3. Length (Centerline to End)
  4. Barrel Length

How to Determine a U-joint Series

 
U-Joint Series
E
U-Joint Width (inches)
F
Cap Diameter (inches)
3R 2.562 1.125
1310 3.219 1.062
1330 3.622 1.062
1350 3.622 1.188
1410 4.188 1.188
1480 4.188 1.375
1485 4.178 1.375
1550/1555 4.964 1.375 outside snap rings

Measure the inside snap ring, indicated on the diagram as G.

Learn more about Sonnax slip yokes