Flange Yoke
Part No. T3-2-1719

Ford Super Duty (Front)

OE Part No. F81Z-4865-DA

Sonnax aluminum flange yoke T3-2-1719 connects the transmission output to the front of the driveshaft in most '05-'16 Ford F-250, F-350, F-450 and F-550 Super Duty models. While the OEM uses cast steel yokes in this position, the Sonnax billet aluminum yoke is just as strong — while providing rotational weight savings. Coupling this yoke with an aluminum driveshaft and differential flange yoke T3-2-1869 is the best way to dramatically lower rotating mass, without sacrificing strength or performance.

Sonnax flange yoke T3-2-1719 is a custom part and may fit more models than noted above. Measure flange O.D., output flange bolt holes and bolt circle diameter to determine if this yoke is appropriate for your build.

  • Material: 6061-T6 Aluminum
  • Pilot Type: F
  • U-Joint Series: 1480
  • Bolt Count: 4
  • Bolt Circle Dia.: 4.25"
  • Bolt Hole Dia.: 0.472"
  • Flange Outer Dia.: 5.861"
  • Flange Face to Centerline: 2.000"
  • Pilot Dia.: 2.679"
  • Weight: 1.700lbs

Where to Buy

Contact your local driveline shop for availability. If you need assistance finding a shop, or if you would like to become a distributor, fill out the form and a Sonnax driveline product specialist will contact you.

  •  Flange Yoke T3-2-1719

Aluminum Flange Yokes

  • Precision machined from billet aluminum
  • Unrivaled concentricity for exceptional balance & minimal runout
  • Significantly reduced weight vs. steel (up to 54%)
  • Superior craftsmanship & finish complement a show-quality driveline

What vehicles do these flanges fit?

Measure bolt circle diameter as well as pinion and output flange bolt hole diameters to determine if these yokes will fit your build.

  1. U-Joint Series
  2. Bolt Hole Dia.
  3. Bolt Circle Dia.
  4. Pilot Style
  5. Flange Face to Centerline