Remanufactured Valve Body
Chr107

42RH, 44RH
Remanufactured Valve Body CHR107

Hydraulic, with Tube

Sonnax rebuilt valve body CHR107 is no longer in production. Please check with your distributor for availability. For service inquiries, please see details on Sonnax’s Limited Lifetime Warranty on remanufactured valve bodies.

Chr105

42RH, 44RH
Remanufactured Valve Body CHR105

Hydraulic, without Tube

Sonnax rebuilt valve body CHR105 is no longer in production. Please check with your distributor for availability. For service inquiries, please see details on Sonnax’s Limited Lifetime Warranty on remanufactured valve bodies.

Internal
12860 01k

Bearing & Plate Kit 12860-01K

O.D. Sungear to Planet

    Helps cure:
  • Bearing noise
  • Bearing failure
Sbk c16

Bearing Kit SBK-C16

1988 & later

    Helps cure:
  • Bearing noise
  • Bearing failure
12738

Inner Overdrive Bearing 12738

  • Bearing Style: Enclosed
  • Inner Dia.: 2.168"
  • Outer Dia.: 3.218"
  • Width: 0.190"
    Helps cure:
  • Bearing noise
  • Bearing failure
22171a 02k

Intermediate Plug & Pilot Kit 22171A-02K

    Helps cure:
  • Poor lube oil control
  • Recontamination of new parts
  • Unable to clean shaft
12510 01

Output Pilot Bushing 12510-01

'90-Later

  • Bushing Style: Precision
  • Material: Steel-backed bimetal
  • Width: 0.480"
  • Shaft Dia.: 0.601"
  • Housing Bore: 0.746"
    Helps cure:
  • Bushing wear
  • Bushing failure
12783 01k

Overdrive Shim Kit 12783-01K

  • Material: Steel
    Helps cure:
  • Not enough OE washers to properly set end clearance
12509 01

Oversized O.D. Sprag Pilot Bushing 12509-01

Fits '88-later units.

  • Bushing Style: Precision
  • Material: Steel-backed bimetal
  • Width: 0.710"
  • Shaft Dia.: 2.140"
  • Housing Bore: 2.301"
    Helps cure:
  • OD roller clutch failure
  • Aftermarket replacement bushings are a poor fit in output shaft housing
12962n 02k

Oversized Piston Retainer Kit 12962N-02K

    Helps cure:
  • Loss of lubrication oil to planetaries
  • Reverse drum, retainer & planet failure
12962n 01k

Piston Retainer Kit 12962N-01K

    Helps cure:
  • Loss of lubrication oil to planetaries
  • Reverse drum, retainer & planet failure
12802 01

Primary Governor Valve 12802-01

Fits ‘90-‘03 units only. Not for use as OE steel valve replacement.

    Helps cure:
  • Early upshifts
  • Late upshifts
  • 2nd Gear starts
12780 z

Rear Planet Endplay Shim 12780-Z

For 3- or 4-tanged OE washers.

  • Material: Steel
  • Inner Dia.: 2.000"
  • Thickness: 0.010"
  • Outer Dia.: 2.810"
    Helps cure:
  • Excess total transmission endplay
Pump
12502 01

Pump Bushing 12502-01

Precision

  • Bushing Style: Precision
  • Material: Steel-backed bimetal
  • Width: 0.535"
  • Shaft Dia.: 1.498"
  • Housing Bore: 1.619"
    Helps cure:
  • Pump seal leakage
  • Pump noise
  • Loss of prime
  • Low pump volume
  • Low cooler flow
  • TCC codes
  • Switch codes
Valve Body
12861 01

3-4 Accumulator Spring 12861-01

Matches OE diesel calibration.

    Helps cure:
  • 3-4 Soft
22771a 01

4-Spool Switch Valve 22771A-01

Replaces 4-spool valves only.

    Helps cure:
  • Lockup shudder
  • Overheated converter
  • Low cooler flow
  • Soft TCC apply
  • Build up of release pressure during lockup
22990 01

Boost Valve Spring Retainer 22990-01

    Helps cure:
  • Leakage of 4th & TCC oil pressure
  • Slipping gears
10000 03k

E-Ring 10000-03K

Manual shaft

  • Shaft Dia.: 0.250"
    Helps cure:
  • Lost or damaged component
22771 14k

Governor Bore Plug Kit 22771-14K

    Helps cure:
  • 1-2 Shuttle
  • 2-3, 3-2 Oversensitive
  • Difficulty in adjusting shift timing with TV linkage
  • Early upshifts
22771 hdk3

Heavy Duty Throttle Valve Kit 22771-HDK3

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

22229 04k

Line Pressure Plug & Sleeve Kit 22229-04K

.264" Dia. Plug

    Helps cure:
  • Reverse slip
  • Poor line pressure control
  • Poor Forward & Reverse engagement
  • Poor cooler charge at idle
  • Soft Reverse
22229 01k  1

Line Pressure Plug & Sleeve Kit 22229-01K

.200" dia. Plug

    Helps cure:
  • Reverse slip
  • Poor line pressure control
  • Poor Forward & Reverse engagement
  • Poor cooler charge at idle
  • Soft Reverse
22771a 02k  1

Lube Regulated Pressure Regulator Valve 22771A-02K

Fits '78-later

    Helps cure:
  • Delayed engagement
  • Pressure regulator buzz
  • Converter drain back
  • Lube failures
  • Converter bushing failure
22771 09

Manual Valve 22771-09

For use in conjunction with '78-later pressure regulator valve only; see instructions for details.

    Helps cure:
  • Delayed engagement
  • No cooler flow in Park
  • Converter bushing failure
  • Overheated converter
  • Forward clutch drags in Park
22229 03  1

Neutral Safety Back-Up Insulator Service Kit 22229-03

Fits '70-'02 units with 3 terminal switch only.

    Helps cure:
  • Lost or damaged component
22229 07k

Neutral Safety Backup Insulator Service Kit 22229-07K

Fits '01-later units with digital range sensor

    Helps cure:
  • Lost or damaged component
22771a 13

Oversized 4-Spool Switch Valve 22771A-13

    Helps cure:
  • Lockup shudder
  • Overheated converter
  • Low cooler flow
  • Soft TCC apply
  • Build up of release pressure during lockup
22771 19k  1

Oversized Lockup Boost Valve Kit 22771-19K

    Helps cure:
  • TCC slip under load
  • No line rise during TCC apply in 4th
  • Overheated converter
  • Loss of lube oil
  • High line pressure with no indication of boost
  • No lockup
  • TCC cycling
22771a 07k

Oversized Lube Regulated Pressure Regulator Valve Kit 22771A-07K

Original valve must match '78-later design

    Helps cure:
  • Delayed engagement
  • Pressure regulator buzz
  • Converter drain back
  • Lube failures
  • Converter bushing failure
22771 04k

Oversized Throttle Valve Kit 22771-04K

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

    Helps cure:
  • Shift timing concerns
  • Throttle buzz
  • Poor kickdown
  • 2-3 Late
  • 3-2 Oversensitive
Sc 42rhe

The Sure Cure® Kit SC-42RHE

    Helps cure:
  • Low cooler flow
  • Lube failures
  • Build up of release pressure during lockup
  • Converter bushing failure
  • Lockup shudder
  • Overheated converter
  • Soft TCC apply
22771 03k

Throttle Valve Kit 22771-03K

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

    Helps cure:
  • Shift timing concerns
  • Throttle buzz
  • Poor kickdown
  • 2-3 Late
  • 3-2 Oversensitive
22771 12k

Valve Body Detent Ball & Sleeve Kit 22771-12K

Kit is designed to fit both the short and long OE detent bore designs.

    Helps cure:
  • Manual lever binds in Park position
  • Damaged valve body casting
  • Linkage loose
  • No start
22771 36 single

Valve Body Detent Spring 22771-36

Fits both short and long OE detent bore designs.

    Helps cure:
  • Manual lever binds
  • Linkage loose
  • No start
Case
10000 13

Checkball 10000-13

  • Material: Plastic
  • Dia.: 0.188"
22000 01

Cooler Line Adapter 22000-01

For cases with 1/4" pipe fittings only.

    Helps cure:
  • Oil leaks
22000 01k

Cooler Line Repair Kit 22000-01K

For cases with 1/4" pipe fittings only.

    Helps cure:
  • Oil leaks
22841 01k

Intermediate Accumulator Sleeve Kit 22841-01K

    Helps cure:
  • 1-2 Soft
  • Delayed engagement
  • Forward clutch failure
  • Low line rise
22841 04sk

Replacement Seal Kit 22841-04SK

For 22841-04K

22179 02

Shift Lever Case Bore Repair Sleeve 22179-02

    Helps cure:
  • Leaking manual shaft case seal
Servo/Band
22912a

Rear Servo Piston 22912A

2.54" O.D.

    Helps cure:
  • Burnt bands
  • No Reverse
  • Rear servo piston sticking/breakage
22912 01k

Reverse Servo Piston Plug Kit 22912-01K

    Helps cure:
  • No Reverse
  • Burnt Reverse band
  • Reverse servo piston plug breakage
  • Reverse servo piston plug wear
Other
F 22771a tl7

Tool Kit F-22771A-TL7

F 22771 tl19

Tool Kit F-22771-TL19

F 22771 tl

Tool Kit F-22771-TL

22771 tl12

Tool Kit 22771-TL12

22771a tl13

Tool Kit 22771A-TL13

56361 tl

Tool Kit 56361-TL