Remanufactured Valve Body
Chr131

46RE, 47RE
Remanufactured Valve Body CHR131

’00-Later, with Small Pump Inlet, Late Sensor

Chr130

46RE, 47RE
Remanufactured Valve Body CHR130

’99-Earlier, with Large Pump Inlet, Early Sensor

Chr132

46RE, 47RE
Remanufactured Valve Body CHR132

’00-Later, with Large Pump Inlet, Late Sensor

Chr129

46RE, 47RE
Remanufactured Valve Body CHR129

’99-Earlier, with Small Pump Inlet, Early Sensor

Internal
22700et 01

4-Tab Thrust Washer 22700ET-01

  • Material: PTFE-Coated
  • Inner Dia.: 2.250"
  • Outer Dia.: 3.400"
  • Thickness: 0.060"
  • Tab Count: 4
12860 01k

Bearing & Plate Kit 12860-01K

O.D. Sungear to Planet

    Helps cure:
  • Bearing noise
  • Bearing failure
12738

Inner Overdrive Bearing 12738

  • Bearing Style: Enclosed
  • Inner Dia.: 2.168"
  • Outer Dia.: 3.218"
  • Width: 0.190"
    Helps cure:
  • Bearing noise
  • Bearing failure
22171a 02k

Intermediate Plug & Pilot Kit 22171A-02K

    Helps cure:
  • Poor lube oil control
  • Recontamination of new parts
  • Unable to clean shaft
12510 01

Output Pilot Bushing 12510-01

'90-Later

  • Bushing Style: Precision
  • Material: Steel-backed bimetal
  • Width: 0.480"
  • Shaft Dia.: 0.601"
  • Housing Bore: 0.746"
    Helps cure:
  • Bushing wear
  • Bushing failure
12783 01k

Overdrive Shim Kit 12783-01K

  • Material: Steel
    Helps cure:
  • Not enough OE washers to properly set end clearance
12655c 1

Overdrive Sun Gear 12655C-1

'95-Later, 15° helical cut

    Helps cure:
  • Lost or damaged component
12509 01

Oversized O.D. Sprag Pilot Bushing 12509-01

Fits '88-later units.

  • Bushing Style: Precision
  • Material: Steel-backed bimetal
  • Width: 0.710"
  • Shaft Dia.: 2.140"
  • Housing Bore: 2.301"
    Helps cure:
  • OD roller clutch failure
  • Aftermarket replacement bushings are a poor fit in output shaft housing
22754n 02k

Oversized Piston Retainer Kit 22754N-02K

    Helps cure:
  • Loss of lubrication oil to planetaries
  • Reverse drum, retainer & planet failure
22754n 01k

Piston Retainer Kit 22754N-01K

    Helps cure:
  • Loss of lubrication oil to planetaries
  • Reverse drum, retainer & planet failure
3647 01

Rear (Forward) Clutch Inner Lip Seal 3647-01

  • Material: Viton®
  • Seal Style: Solid
  • Height: 0.180"
  • Width: 0.515"
  • Outer Dia.: 2.300"
    Helps cure:
  • Delayed Forward
  • Delayed engagement
  • Burnt Forward clutch
22700 z

Shim 22700-Z

Fits either the 3- or 4-tanged OE thrust washer design. Endplay

  • Material: Steel
  • Outer Notch Count: 6
  • Inner Dia.: 2.520"
  • Thickness: 0.010"
  • Outer Dia.: 3.406"
    Helps cure:
  • Excess total transmission endplay
Valve Body
12861 01

3-4 Accumulator Spring 12861-01

Matches OE diesel calibration.

    Helps cure:
  • 3-4 Soft
22771a 01

4-Spool Switch Valve 22771A-01

Replaces 4-spool valves only.

    Helps cure:
  • Lockup shudder
  • Overheated converter
  • Low cooler flow
  • Soft TCC apply
  • Build up of release pressure during lockup
22990 01

Boost Valve Spring Retainer 22990-01

    Helps cure:
  • Leakage of 4th & TCC oil pressure
  • Slipping gears
10000 08

Checkball 10000-08

Imidized Plastic, .250" Dia.

  • Material: Imidized Plastic
  • Dia.: 0.250"
    Helps cure:
  • Lost or damaged component
10000 03k

E-Ring 10000-03K

Manual shaft

  • Shaft Dia.: 0.250"
    Helps cure:
  • Lost or damaged component
22771 14k

Governor Bore Plug Kit 22771-14K

    Helps cure:
  • 1-2 Shuttle
  • 2-3, 3-2 Oversensitive
  • Difficulty in adjusting shift timing with TV linkage
  • Early upshifts
22771 hdk3

Heavy Duty Throttle Valve Kit 22771-HDK3

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

22229 04k

Line Pressure Plug & Sleeve Kit 22229-04K

.264" Dia. Plug

    Helps cure:
  • Reverse slip
  • Poor line pressure control
  • Poor Forward & Reverse engagement
  • Poor cooler charge at idle
  • Soft Reverse
22229 01k  1

Line Pressure Plug & Sleeve Kit 22229-01K

.200" Dia. Plug

    Helps cure:
  • Reverse slip
  • Poor line pressure control
  • Poor Forward & Reverse engagement
  • Poor cooler charge at idle
  • Soft Reverse
22771a 02k  1

Lube Regulated Pressure Regulator Valve 22771A-02K

Fits '78-later

    Helps cure:
  • Delayed engagement
  • Pressure regulator buzz
  • Converter drain back
  • Lube failures
  • Converter bushing failure
22771 09

Manual Valve 22771-09

For use in conjunction with '78-later pressure regulator valve only; see instructions for details.

    Helps cure:
  • Delayed engagement
  • No cooler flow in Park
  • Converter bushing failure
  • Overheated converter
  • Forward clutch drags in Park
22229 03  1

Neutral Safety Back-Up Insulator Service Kit 22229-03

Fits '70-'02 units with 3 terminal switch only.

    Helps cure:
  • Lost or damaged component
22229 07k

Neutral Safety Backup Insulator Service Kit 22229-07K

Fits '01-later units with digital range sensor

    Helps cure:
  • Lost or damaged component
22771a 13

Oversized 4-Spool Switch Valve 22771A-13

    Helps cure:
  • Lockup shudder
  • Overheated converter
  • Low cooler flow
  • Soft TCC apply
  • Build up of release pressure during lockup
22771 19k  1

Oversized Lockup Boost Valve Kit 22771-19K

    Helps cure:
  • TCC slip under load
  • No line rise during TCC apply in 4th
  • Overheated converter
  • Loss of lube oil
  • High line pressure with no indication of boost
  • No lockup
  • TCC cycling
22771a 07k

Oversized Lube Regulated Pressure Regulator Valve Kit 22771A-07K

Original valve must match '78-later design

    Helps cure:
  • Delayed engagement
  • Pressure regulator buzz
  • Converter drain back
  • Lube failures
  • Converter bushing failure
22771 04k

Oversized Throttle Valve Kit 22771-04K

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

    Helps cure:
  • Shift timing concerns
  • Throttle buzz
  • Poor kickdown
  • 2-3 Late
  • 3-2 Oversensitive
Sc 46 47rhe os webcombo

The Sure Cure® Kit SC-46-47RHE-OS

    Helps cure:
  • 2-3 Late
  • 2-3 Oversensitive
  • Build up of release pressure during lockup
  • Converter bushing failure
  • Delayed engagement
  • Lockup shudder
  • Low cooler flow
  • Lube failures
  • Overheated converter
  • Poor cooler charge at idle
  • Poor Forward & Reverse engagement
  • Poor kickdown
  • Poor line pressure control
  • PR valve buzz
  • Reverse slip
  • Shift timing concerns
  • Soft TCC apply
22771 03k

Throttle Valve Kit 22771-03K

Fits all Chrysler RWD models, including ‘05-later units with motorized linkage.

    Helps cure:
  • Shift timing concerns
  • Throttle buzz
  • Poor kickdown
  • 2-3 Late
  • 3-2 Oversensitive
22771 12k

Valve Body Detent Ball & Sleeve Kit 22771-12K

Kit is designed to fit both the short and long OE detent bore designs.

    Helps cure:
  • Manual lever binds in Park position
  • Damaged valve body casting
  • Linkage loose
  • No start
22771 36 single

Valve Body Detent Spring 22771-36

Fits both short and long OE detent bore designs.

    Helps cure:
  • Manual lever binds
  • Linkage loose
  • No start
46 47rhe zip kit

Zip Kit® 46-47RHE-ZIP

    Helps cure:
  • 2-3 Late
  • 2-3 Oversensitive
  • Build up of release pressure during lockup
Case
22556 brg

Case Repair Bearing 22556-BRG

  • Bearing Style: Enclosed
  • Material: Hardened Steel
  • Outer Dia.: 3.384"
  • Inner Dia.: 2.500"
  • Thickness: 0.150"
    Helps cure:
  • Damaged case
  • Output & planet assembly wear
  • Output & planet assembly failure
10000 13

Checkball 10000-13

  • Material: Plastic
  • Dia.: 0.188"
22000 01

Cooler Line Adapter 22000-01

For cases with 1/4" pipe fittings only.

    Helps cure:
  • Oil leaks
22000 01k

Cooler Line Repair Kit 22000-01K

For cases with 1/4" pipe fittings only.

    Helps cure:
  • Oil leaks
22841 01k

Intermediate Accumulator Sleeve Kit 22841-01K

    Helps cure:
  • 1-2 Soft
  • Delayed engagement
  • Forward clutch failure
  • Low line rise
22179 06k

NSS Adapter Kit 22179-06K

Allows late-style, five-wire neutral safety switch cases to be used in early-style, three-wire vehicles.

    Helps cure:
  • Late cases cannot be used for early applications
22841 04sk

Replacement Seal Kit 22841-04SK

For 22841-04K

22179 02

Shift Lever Case Bore Repair Sleeve 22179-02

    Helps cure:
  • Leaking manual shaft case seal
Servo/Band
22900 15

Extended Length Band Strut 22900-15

.150" Longer than OE

    Helps cure:
  • No Reverse
  • Soft Reverse
22900 10

Extended Length Band Strut 22900-10

.100" Longer than OE

    Helps cure:
  • No Reverse
  • Soft Reverse
22827 01

Front Servo Piston Cover Kit 22827-01

    Helps cure:
  • 2-3 Long slide
  • Direct clutch failure
  • Direct clutch failure
22912

Rear Servo Piston 22912

    Helps cure:
  • Burnt bands
  • No Reverse
  • Rear servo piston sticking/breakage
22301b sk

Replacement Seal Kit 22301B-SK

For 22301B-01K

22912 01k

Reverse Servo Piston Plug Kit 22912-01K

    Helps cure:
  • No Reverse
  • Burnt Reverse band
  • Reverse servo piston plug breakage
  • Reverse servo piston plug wear
Other
F 22771a tl7

Tool Kit F-22771A-TL7

F 22771 tl19

Tool Kit F-22771-TL19

F 22771 tl

Tool Kit F-22771-TL

22771 tl12

Tool Kit 22771-TL12

22771a tl13

Tool Kit 22771A-TL13

56361 tl

Tool Kit 56361-TL