This combination of filters has no results. You can either remove them one by one, or clear all filters using the button below.
Fits units with 1.219" (30.97mm) shafts only.
Fits units with 1.396" (35.47mm) shafts only.
Fits units with .904" (22.98mm) shafts only.
Fits units with .833" (21.15mm) shafts only.
Fits .952" (24.17mm) diameter input shaft front journal. Not all ZF6HP19/21 units utilize a front stator support bushing; application must be verified before installation.
Fits either clutch A or E control bore locations in E-shift versions of ZF6HP21/28/34 (Generation 2) valve bodies only.
OE valve name: WK-V
ZF valve name: SCHM-V
Fits E-shift versions only of the ZF6HP21/28/34 (Generation 2) and ZF6HP19/26/32 (Generation 1) valve bodies with an 053 separator plate.
ZF valve name: SYS.DR-V
ZF valve name: DR.REO-V
Use the ZF6 Valve Body Separator Plate Application Chart to determine which plate is required. The plates are not specific by transmission model, but rather by valve body code and also by the stamped number. OE Valve Body Codes A063 & B063
Use the ZF6 Valve Body Separator Plate Application Chart to determine which plate is required. The plates are not specific by transmission model, but rather by valve body code and also by the stamped number. OE Valve Body Codes A065 & B065
December 21, 2012
January 14, 2014
July 01, 2020
Andrew Jessiman
October 08, 2020
Maura Stafford
December 12, 2014
January 25, 2023
Maura Stafford
August 01, 2017
July 27, 2017
June 29, 2016
Maura Stafford
March 25, 2016
March 23, 2016
Bob Warnke
May 14, 2015
October 24, 2014
