Transmission Parts ZF ZF6HP19 ZF6HP21 Internal Bushing Kit

Print Share

Symptoms:

E Clutch burned
B Clutch burned
Gear ratio & solenoid codes
Bushing wear
Bushing failure

Cause:

OE bushing material composition allows premature wear.

Correction:

Install improved Sonnax bushing kit to restore critical clearances and resist untimely wear.

Warning:

Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

ZF6HP19, ZF6HP21

Bushing Kit
Part No. 95030-19K

Find a Distributor

OE bushings in ZF6HP19 and ZF6HP21 units have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, loss of correct pressure to the "E" clutch and "B" clutch, and gear ratio or solenoid codes. Sonnax improved bushing kit 95030-19K restores worry-free operation.

Upgraded material composition outperforms OE bushings
Superior wear characteristics eliminate premature deterioration

Contents

Rear Stator Support Bushing Fits 1.022" (25.97mm) Input Shaft Rear Journal
Front Stator Support Bushing Fits .952" (24.17mm) Input Shaft Front Journal
"A" Drum Front Bushing Fits 2.353" (59.77mm) Stator Shaft Journal
"A" Drum Rear Bushing Fits 1.967" (49.97mm) Stator Shaft Journal
Input/Output Shaft Bushing (2) Fits .669" (16.98mm) Intermediate "E" Shaft Journal
Sun Gear Shaft Bushing Fits .853" (21.68mm) Intermediate "E" Shaft Journal
Sun Gear Shaft Bushing Fits .904" (22.98mm) Intermediate "E" Shaft Journal
Sun Gear Shaft Bushing (2) Fits .833" (21.15mm) Intermediate "E" Shaft Journal
"B" Clutch Bushing Fits 1.219" (30.97mm) Sun Gear Shaft Journal
"B" Clutch Bushing Fits 1.396" (35.47mm) Sun Gear Shaft Journal