• Bushing wear
  • Bushing failure


OE bushing material composition allows premature wear.


Install improved Sonnax "A" drum rear bushing to restore critical clearances and resist untimely wear.


Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.

ZF6HP19, ZF6HP26, ZF6HP28

"A" Drum Rear Bushing
Part No. 95030-04

Fits 1.967" (49.97mm) dia. shaft journals only.

Package Quantity: 5

Find a Distributor

The OE bushing at the rear of the "A" drum in ZF6HP19, ZF6HP26 and ZF6HP28 units has a tendency to wear out and fail prematurely due to sub-optimal material composition. Sonnax offers improved "A" drum rear bushing 95030-04 to restore worry-free operation.

  • Upgraded material composition outperforms OE bushing
  • Superior wear characteristics eliminate premature deterioration
  • Bushing Style: Precision
  • Material: Bimetal
  • Housing Bore: 2.088"
  • Shaft Dia.: 1.967"
  • Width: 0.307"
  • ZF6HP19, ZF6HP26, ZF6HP28 "A" Drum Rear Bushing 95030-04
  • ZF6HP19, ZF6HP26, ZF6HP28 "A" Drum Rear Bushing 95030-04