For 40 and 41 series transmissions, this kit CANNOT be used in early units that have #33 separator plates. Kit can only be used in later designs that have a #4 retainer clip inthe TCC control valve bore. Kit is compatible with all 42LE, 42RLE and 62TE units.
Fits bores containing OE switch valve with .453" dia. large spool and ID groove.
Codes 841, 868, 871, 988, 1775, 1776
OD clutch burned
TCC apply & release concerns (41 & 42 series)
Engine stall (41 & 42 series)
2nd Gear starts w/MIL on
4th Clutch burned
While Sonnax makes every effort to ensure the accuracy of technical articles at time of publication, we assume no liability for inaccuracies or for information which may become outdated or obsolete over time.