4R70E, 4R70W, 4R75E, 4R75W Heavy Duty Remanufactured Valve Body F095HD
'01-'08. F095HD has solenoids that connect to a hard wire harness; includes inboard and outboard springs.
This combination of filters has no results. You can either remove them one by one, or clear all filters using the button below.
Remanufactured Valve Body
4R70E, 4R70W, 4R75E, 4R75W Heavy Duty Remanufactured Valve Body F098HD
'09-Later. F098HD has solenoids that connect to a soft wire harness; includes inboard and outboard springs.
Internal
Direct Drum Thrust Bearing 76243-01
Fits all years.
- Bearing Style: Thrust-Enclosed
- Inner Dia.: 1.254"
- Outer Dia.: 2.111"
- Thickness: 0.227"
-
Helps cure:
- Bearing noise
- Bearing failure
Smart-Tech® Direct Clutch Drum & Shaft Kit 76656-01K
Fits all 2.84/1.55 gear sets. Can be used with 2.40/1.46 gear sets when late AODE sun gear is substituted. Early AOD sun gears cannot be used due to smaller bore. Bore must be at least 1.120” to fit over shaft spline.
Smart-Tech® Forward Clutch Drum 76654-01K
Compatible with ISS-equipped and non ISS-equipped applications.
-
Helps cure:
- No Forward
- Slipping gears
- Broken clutch drum
- Ratio codes
Spiral Retaining Ring Kit 76554RK
Works in roller clutch or mechanical diode applications.
-
Helps cure:
- Intermediate roller clutch failure
- Mechanical diode failure
- Retaining ring pops out of groove
Pump
Pump Bushing 36002-01
Finish-in-Place
- Bushing Style: Finish-in-Place
- Material: Steel-backed bronze
- Width: 0.695"
- Shaft Dia.: 1.996"
- Housing Bore: 2.124"
-
Helps cure:
- Leaking front seal
- Pump noise
- Excess converter hub-to-bushing clearance
- Low pump volume
Valve Body
Boost Valve Kit 76948-02K
Fits '91-later units.
-
Helps cure:
- Low Reverse boost
- Delayed Reverse
- Reverse slip
- No Reverse
- Low line rise in Reverse
- Burnt Reverse clutch
Bypass Clutch Control Plunger Valve Kit 76948-04K
-
Helps cure:
- Shudder
- Code 628
- No lockup
- TCC apply & release concerns
- Delayed lockup
Checkball 10000-08
Imidized Plastic, .250" Dia.
- Material: Imidized Plastic
- Dia.: 0.250"
-
Helps cure:
- Lost or damaged component
Elevated Pressure Regulator Valve Kit 76948-12K
Fits '96-Later units only.
-
Helps cure:
- Soft shifts
- Poor shift quality
- Low base line pressure
- Delayed Forward
- Forward clutch failure
Main Pressure Regulator Valve 76948-09
Fits '96-later applications.
-
Helps cure:
- Poor shift quality
- Soft shifts
- Low line rise
- Erratic buzz
- Premature clutch failure
- Premature band failure
- Low Reverse boost
- Uncontrolled pressure in Reverse
O-Ringed 3-4 Shift Valve End Plug Kit 76948-49K
Fits '01-later units.
-
Helps cure:
- Burnt bands
- No Reverse
- No 4th
Overdrive Servo Regulator Kit 76948-29K
Fits '01-later units only.
-
Helps cure:
- 4-3 Neutral
- No 4th
- Burnt OD band
Oversized Bypass Clutch Control Valve 76948-31
-
Helps cure:
- Code 628, 741, 1741, 1744
- No lockup
- TCC slip
- Low cooler flow
-
Tooling:
- 76948-TL6
- F-76948-TL6
Oversized Converter Limit Valve Kit 76948-58K
-
Helps cure:
- Converter shudder & TCC slip
- Low converter pressure
- Excess converter pressure
- Damaged converter
- Overheated converter
-
Tooling:
- F-76948-TL47
Oversized Manual Valve Kit 76948-46
-
Helps cure:
- Delayed engagement
- Low line pressure
- Burnt bands
- Burnt clutches
-
Tooling:
- F-76948-TL46
- VB-FIX
Oversized Pressure Regulator & Boost Valve Kit 76948-17K
Fits '96-later only.
-
Helps cure:
- Uncontrolled pressure in Reverse
- Soft shifts
- Delayed Reverse
- Low line rise
- Throttle buzz
- Erratic Reverse pressure
- Clutch failure
- Band failure
- Damaged case
-
Tooling:
- F-76948-TL
- 76948-TL4
- 76948-BST
- VB-FIX
- VB-FIX
Oversized Solenoid Regulator Valve Kit 76948-47K
-
Helps cure:
- Erratic shifts
- Loss of Forward under hard acceleration from a stop
- 2-3 Neutral
- Neutral after 4th
- No 2nd
- 3rd & Reverse only
-
Tooling:
- F-76948-TL47
- VB-FIX
Solenoid Regulator Valve Kit 76948-14K
-
Helps cure:
- Erratic shifts
- Loss of Forward under hard acceleration from a stop
- 2-3 Neutral
- Neutral after 4th
- No 2nd
- 3rd & Reverse only
-
Tooling:
- 76948-BST2
The Sure Cure® Kit SC-AODE-4R75E
For AODE, fits '96-later only. Fits AODE '96-later only
-
Helps cure:
- 2-3 Neutral
- 4-3 Neutral
- Band failure
- Burnt OD band
- Case damage
- Clutch failure
- Code 628
- Delayed lockup
- Delayed Reverse
- Erratic Reverse pressure
- Erratic shifts
- Loss of Forward under hard acceleration from a stop
- Low line rise
- Neutral after 4th
- No 2nd
- No 4th
- No lockup
- Shudder
- Soft shifts
- TCC apply & release concerns
- Uncontrolled pressure in Reverse
- TCC slip codes
-
Tooling:
- F-76948-TL
- 76948-TL4
- 76948-BST
- F-76948-TL47
- VB-FIX
Valve Body Retainer Plate Kit 76507F-01K
Fits '01-later units.
-
Helps cure:
- Forward & direct clutch failure
- Separator plate cracking
- Cross leaks
Zip Kit® AODE-4R75E-ZIP
For AODE, fits '96-later only AODE '96-later only, updated replacement for obsoleted SC-AODE-1
-
Helps cure:
- 4-3 Neutral
- Code 628
- Delayed lockup
- Forward clutch failure
- Intermediate roller clutch failure
- Low line rise
- Low Reverse boost
- Mechanical diode failure
- No 4th
- OD band failure
- Poor shift quality
- Soft shifts
- TCC apply & release concerns
Case
1-2 Accumulator Sleeve Kit 76890-01K
-
Helps cure:
- 1-2 Harsh
- Delayed Forward
- Cases with worn or scored 1-2 accumulator bores
2-3 Accumulator Piston Kit 76890-21K
-
Helps cure:
- No Forward unless RPM increased
- Low line pressure in Forward
- Bonded piston seal delamination
- Direct clutch failure
- OD band distress
Shift Lever Case Bore Repair Sleeve 56361-01K
-
Helps cure:
- Manual valve moves out of position
- Leaking manual shaft case seal
-
Tooling:
- 56361-TL
Servo/Band
Servo Pin Bore Sleeve 76890-24K
-
Helps cure:
- 2nd Clutch burned (GM)
- Burnt band (GM)
- 3rd Clutch burned
- 2-3 Flare
-
Tooling:
- S-76890-TL24
